Ultra Low Pressure: ULP Series

 

Brief Introduction

 

ULP440-MAX and LP440-MAX membrane elements can increase permeate flow by 15% and 20% respectively, while maintaining the required rejection rate. PURO-I membrane elements are more pollution-resistant and more resilient to a wide range of chemical cleaning thans to its improved cross-link strength of Polyamide desalination layer.

Scope of Application

ULP series RO element normally suitable for treatment of surface water, underground water and municipal water with TDS is less than 2000 ppm. It is mainly applied in bottle water, drinking water, boiler replenishment water, food processing and pharmaceutical manufacturing industries and other fields.

Specifications and Major Properties

 

Model

Active Membrane

Area

ft2(m2)

Permeate flow

GPD(m3/d)

Stable Rejecion

Rate

%

Feed Spacer

Thickness

mil

ULP400-LD

40037.2

1050039.7

99.5

34-LD

ULP440-MAX

44040.9

1200045.4

99.5

28




* Product performance may vary under different conditions, and the information on this website is for reference only and is not to be relied upon as a guarantee of performance in actual applications. It is the responsibility of the users to determine whether the products and information on this website are suitable for the settings in which they are used and to ensure that the products are used in a manner consistent with applicable laws and regulations. Vontron assumes no obligation or responsibility for the information on this website and is not responsible for any consequences arising from the use and maintenance of the products by the users not in accordance with the conditions provided in this sample. Due to technical progress and product replacement, product information and data may change at any time without prior notice. Please pay attention to the latest product information.