ZERO Liquid Discharge(ZLD)- ZERO series

 

Brief Introduction

ZERO-FR10 element is one of the industry’s most advanced fouling resistant element technology special designed for high TDS level 5000-15000 ppm, and high COD wastewater reclaiming in zero liquid discharge process. Base on the new generation of membrane separation layer technology and unique component structure, It is a low pressure drop, long cleaning cycle, high chemical cleaning resistance membrane element product.
ZERO-HP 70 is a series of high pressure reverse osmosis membrane element. The highly desalinized membrane product is developed for TDS 15000-35000 ppm brine concentration. Based on the SW serial element to improve the performance of the bearing higher pressure, and the Zeta potential and hydrophilicity of the membrane are also improved.

ZERO-UHP 120 is a series of ultra-high pressure reverse osmosis membrane element. The membrane product is developed for TDS 35000-70000 ppm brine concentration with a maximum operating pressure up to 120 bar, suitable for concentration and reduction of high salt waste water discharge.
ZERO-XS 90 is a series of nanofiltration separation membrane element. It is a highly selective fouling resistant nanofi ltration membrane product developed for sodium chloride and sodium sulfate of Low energy consumption resource recycling. It is suitable for the selective separation of TDS 35000-70000 ppm high pollution concentrated brine in zero liquid discharge process of chlor-alkali, desulfurization wastewater, remove sodium sulfate from dyeing wastewater.

Scope of Application

ZERO-FR10 element is the special designed for high TDS level 5000-15000 ppm, and high COD wastewater reclaiming in zero liquid discharge process. 

ZERO-HP 70 element is the highly desalinized membrane product is developed for TDS 15000-35000 ppm brine concentration.

ZERO-UHP 120 element is the membrane product is developed for TDS 35000-70000 ppm brine concentration ,suitable for concentration and reduction of high salt waste water discharge.

ZERO-XS 90 element is suitable for the selective separation of TDS 35000-70000 ppm high pollution concentrated brine in zero liquid discharge process of chlor-alkali, desulfurization wastewater, remove sodium sulfate from dyeing wastewater.

 

Specifications and Major Propertie

 

Model

Active Membrane

Area

ft2(m2)


Permeate flow

GPD(m3/d)

Stable Rejecion

Rate

%

Feed Spacer

Thickness

mil

ZERO-FR10

400(37.2)

11500(43.5)

99.7

34

ZERO-HP70

400(37.2)

8800(33.3)

99.75

34

ZERO-UHP120

330(30.7)

7400(28.0)

99.7

28

ZERO-XS90

400(37.2)

8300(31.4)

99.0

34


* Product performance may vary under different conditions, and the information on this website is for reference only and is not to be relied upon as a guarantee of performance in actual applications. It is the responsibility of the users to determine whether the products and information on this website are suitable for the settings in which they are used and to ensure that the products are used in a manner consistent with applicable laws and regulations. Vontron assumes no obligation or responsibility for the information on this website and is not responsible for any consequences arising from the use and maintenance of the products by the users not in accordance with the conditions provided in this sample. Due to technical progress and product replacement, product information and data may change at any time without prior notice. Please pay attention to the latest product information.