1
Your current location:
Homepage
/
ZERO Liquid Discharge(ZLD)- ZERO series
All categories

ZERO Liquid Discharge(ZLD)- ZERO series

Description:
Description:
Information

ZERO Liquid Discharge(ZLD)- ZERO series

 

Brief Introduction

ZERO-FR10 element is one of the industry’s most advanced fouling resistant element technology special designed for high TDS level 5000-15000 ppm, and high COD wastewater reclaiming in zero liquid discharge process. Base on the new generation of membrane separation layer technology and unique component structure, It is a low pressure drop, long cleaning cycle, high chemical cleaning resistance membrane element product.
ZERO-HP 70 is a series of high pressure reverse osmosis membrane element. The highly desalinized membrane product is developed for TDS 15000-35000 ppm brine concentration. Based on the SW serial element to improve the performance of the bearing higher pressure, and the Zeta potential and hydrophilicity of the membrane are also improved.

ZERO-UHP 120 is a series of ultra-high pressure reverse osmosis membrane element. The membrane product is developed for TDS 35000-70000 ppm brine concentration with a maximum operating pressure up to 120 bar, suitable for concentration and reduction of high salt waste water discharge.
ZERO-XS 90 is a series of nanofiltration separation membrane element. It is a highly selective fouling resistant nanofi ltration membrane product developed for sodium chloride and sodium sulfate of Low energy consumption resource recycling. It is suitable for the selective separation of TDS 35000-70000 ppm high pollution concentrated brine in zero liquid discharge process of chlor-alkali, desulfurization wastewater, remove sodium sulfate from dyeing wastewater.

Scope of Application

ZERO-FR10 element is the special designed for high TDS level 5000-15000 ppm, and high COD wastewater reclaiming in zero liquid discharge process. 

ZERO-HP 70 element is the highly desalinized membrane product is developed for TDS 15000-35000 ppm brine concentration.

ZERO-UHP 120 element is the membrane product is developed for TDS 35000-70000 ppm brine concentration ,suitable for concentration and reduction of high salt waste water discharge.

ZERO-XS 90 element is suitable for the selective separation of TDS 35000-70000 ppm high pollution concentrated brine in zero liquid discharge process of chlor-alkali, desulfurization wastewater, remove sodium sulfate from dyeing wastewater.

Specifications and Major Propertie

 

Model

Active Membrane Area

ft2(m2)


Permeate flow

GPD(m3/d)

Stable Rejecion

Rate

%

Feed Spacer

Thickness

mil

ZERO-FR10

400(37.2)

11500(43.5)

99.7       

34

ZERO-HP70

400(37.2)

8800(33.3)

99.75      

34

ZERO-UHP120

330(30.7)

7400(28.0)

99.7       

28

ZERO-XS90

400(37.2)

8300(31.4)

99.0       

34

 

Scan the QR code to read on your phone

ADDRESS:

Beijing Office: F16, Building G, Yingkun Century, Automobile Museum East Road,Fengtai Dis., Beijing 100071, CHINA

VONTRON MEMBRANE TECHNOLOGY CO., LTD.

这是描述信息

Facebook