Fouling Resistant: PURO Series
- Categories:Strengthened RO Membrane
- Time of issue:2021-07-15 14:16:58
- Views:0

Fouling Resistant: PURO Series
Brief Introduction
PURO-I membrane elements are more pollution-resistant and more resilient to a wide range of chemical cleaning thans to its improved cross-link strength of Polyamide desalination layer.
PURO-Ⅱ membrane elements have higher endurance to chemical cleaning and obvisouly higher fouling resistance owing to the brand-new design of feed channel spacer with low pressure differentials.
PURO-FRLE, an ultra-low pressure RO Membrane, has the features of fouling resistance and low energy consumption, and is applicable to the treatment of industrial sewage with low salinity, such as electronic sewage and surface water.
Scope of Application
FR series and PURO Series of fouling resistant membranes normally suitable for treatment of complex water source with TDS less than 10000 ppm. It is mainly used for purification of surface water, mining waste water, municipal reclaimed water, industrial waste water, RO brackish water, etc.
Specifications and Major Properties
Model |
Active Membrane Area ft2(m2) |
Permeate flow GPD(m3/d) |
Stable Rejecion Rate % |
Feed Spacer Thickness mil |
PURO-I |
400(37.2) |
10500(39.7) |
99.75 |
34 |
PURO-II |
400(37.2) |
11500(43.5) |
99.8 |
34-LD |
PURO-FRLE |
400(37.2) |
10500(39.7) |
99.6 |
34-LD |
* Product performance may vary under different conditions, and the information on this website is for reference only and is not to be relied upon as a guarantee of performance in actual applications. It is the responsibility of the users to determine whether the products and information on this website are suitable for the settings in which they are used and to ensure that the products are used in a manner consistent with applicable laws and regulations. Vontron assumes no obligation or responsibility for the information on this website and is not responsible for any consequences arising from the use and maintenance of the products by the users not in accordance with the conditions provided in this sample. Due to technical progress and product replacement, product information and data may change at any time without prior notice. Please pay attention to the latest product information.
Scan the QR code to read on your phone

HOTLINE:

ADDRESS:
Beijing Office: F16, Building G, Yingkun Century, Automobile Museum East Road,Fengtai Dis., Beijing 100071, CHINA

MAILBOX:
VONTRON MEMBRANE TECHNOLOGY CO., LTD.
